Today we present an innovative solution that is transforming the industry: water-soluble industrial paints.
Not only do these paints improve the sustainability of each project, but they also offer exceptional performance and unparalleled durability.
At Barpimo Coatings, we are committed to caring for the environment and the quality of our products, and we want to share with you the benefits of choosing our water-soluble paints.
What are the advantages of water-soluble paints?
Water-soluble paints use water as a solvent to disperse the resin and to dilute the paint. In addition, they are easily applicable and provide excellent durability.
The resins they can contain are: alkyd, acrylic, epoxies, polyurethanes... All of them have similar characteristics to solvent resins.
Here is a list of the main advantages of using Barpimo Coatings' water-soluble paints:
✓ Formulated with high-quality resins and components.
✓ Improvements and new waste treatments.
✓ Cleaner and safer technology. Lower environmental impact.
✓ Reduction of occupational risks and pollution.
✓ Reduction of percentage % of VOCs in facilities.
✓ Possibility of using current painting equipment.
✓ Adaptation to European Solvent Emission Regulations : SED-1999/13/EC.
✓ Products integrated in the tinting system, with an infinite range of colors for small quantities.
✓ Adaptation to the Spanish Royal Decree 117/2003 on the limitation of harmful VOC emissions due to the use of solvents.
How should surfaces be prepared for painting with water-soluble paints?
Choosing water-soluble paints for your surfaces requires proper preparation to ensure the best results.
Below we explain depending on the type of cleaning of the surface, the effectiveness that this type of paint can have and whether or not you should paint with them.
Surface cleaning | Efficiency | Can you paint in water? |
| Uncleaned | Deficient | Should not be |
| A rag | Deficient | Should not be |
| Solvent | Regular | Acceptable |
| Blasting | Good | Recommended |
| Blasting | Good | Recommended |
| Amorphous phosphating | Good | Recommended |
| Microcrystalline phosphating | Good | Recommended |
What environmental, surface and product conditions must be present for the application of water-soluble industrial paints?
Surface Conditions
It is advisable to apply when the piece has a temperature between 20ºC and 35ºC.
It is important to clean the surface to be painted well.
Minimum painting temperature: dew point +3ºC
Environmental and Product Conditions
The temperature should not be lower than 5ºC to prevent the formation of ice and the decomposition of the paint.
It is advisable to work at temperatures as close to 20ºC as possible and relative humidity < 70% to avoid delays in drying (when water-based paints are air-dried).
Ensure a good renewal of the drying air current, to avoid saturation and thus slow down the evaporation of water in the piece.
Which application equipment is suitable for painting with water-soluble paints?
Application Equipment | Suitability |
| Airbrush | Adequate |
| Airbrush | Adequate |
| AIRMIX | Adequate |
| AIRLESS | Possible. (Limited according to mouthpiece). |
| Electrostatic | Possible. You need specific equipment for water-soluble products. (Insulation is needed since water is a conductive element.) |
| Flow Coating | Possible. (It requires a specific and appropriate installation for the water-soluble product). |
| Immersion | Possible. (It requires a specific and appropriate installation for the water-soluble product). |
In short, opting for water-soluble industrial paints from Barpimo Coatings is a smart choice that combines sustainability and high performance. Not only do these paints ensure a flawless and long-lasting finish, but they also contribute to a cleaner, healthier environment. By following recommendations for cleaning and surface preparation, you can maximize the benefits of our innovative solutions.
We appreciate your interest in our water-soluble paints and invite you to explore more about our products on our website. At Barpimo Coatings, we are committed to offering you the best in technology and sustainability for your industrial projects. Make a smart and sustainable choice today!