• Out-of-Stock
Indoor water-based ecobarp varnish
search
  • Indoor water-based ecobarp varnish

Indoor water-based ecobarp varnish

High quality transparent finish varnish
4 l
750 ml
375 ml
C. TECHNIQUES
Colors
C. APPLICATION
Suitable for finishing interiors and all types of woods: doors, chairs, tables, furniture in general.
Total transparency
Filling power.
Good hardness.
Suitable for application on vertical surfaces thanks to its thixotropy.
Soft finishes
Tiempo de secado
Dilution Water
Tiempo de secado
T. Drying 5-6hours
Tiempo de secado
T. Repainted 50min
Tiempo de secado
Performance 10-12m2/L
Bright
bright colorless
Satin
colorless satin
Matte
matte colorless
Surface preparation

Surfaces should be clean, dry and consistent. On unvarnished surfaces: Clean, sand and remove dust, grease, oil, waxes and small imperfections. Apply: ECOBARP CAPS TO WATER (Ref. B1883) Apply one or two hands, properly diluted, sanding between layers. On surfaces with aged and deteriorated varnish: Remove these layers and proceed as in the previous case.

Before applying

Application temperature: Above 10ºC. Ambient relative humidity: Less than 70%. Humidity of the support to be applied: Less than 15%

How to use

Remove the contents of the container well. Apply with good air renewal, in thin, uniform and well-extended layers. Percentage of application: Brush (occasionally) Requires high dilutions of water (Equal to or greater than 15%). Airless gun, Airbrush gun depending on the nozzle and pressure used in the application.

Storage

Store in a cool place. Do not store open or started containers.

Calculate how much you need:

Total area
m2
nth Layers
Necessary amount --
Cookie consent