- Out-of-Stock
MM Multisurfaces Multilak...
- Out-of-Stock
Suitable for protection and decoration of wooden surfaces indoors and exceptionally outdoors. Suitable for wood dyeing. Suitable for restoration and beautification of furniture in general.
Surface preparation
Surfaces should be clean, dry and consistent. On unvarnished surfaces: Clean, sand and remove dust, grease, oil, waxes and small imperfections. On surfaces with aged and deteriorated varnish: Remove these layers and proceed as in the previous case.
Before applying
Application temperature: Above 8ºC. Ambient relative humidity: Less than 80%. Humidity of the support to be applied: Less than 15%
How to use
Remove the contents of the container well. Apply with good air renewal, in thin, uniform and well-extended layers. Percentage of application: Brush, 1st hand diluted 5-10% with Water., 2nd and 3rd hand to use or slightly diluted (maximum 5%). Airless gun, depending on the nozzle and pressure used in the application. It does not require prior fund. Apply two hands of product. Darker shades are obtained by applying another layer of the same color. If you want soft and uniform tones apply the first layer of VARNISH DYE ECOBARP TO COLORLESS SATIN WATER (Ref.2963) If with one hand you get the desired tone apply the second hand with VARNISH DYE ECOBARP TO COLORLESS SATIN WATER (Ref.2963)
Storage
Store in a cool place. Do not store open or started containers.
Calculate how much you need: