- Out-of-Stock
MM Multisurfaces Multilak...
- Out-of-Stock
Suitable for sealing and finishing wooden floors indoors
Surface preparation
Surfaces should be clean, dry and consistent. On unvarnished surfaces: Clean and sand, remove dust, grease, oil waxes, small imperfections, etc. On surfaces already varnished and / or aged and deteriorated: Remove varnish in poor condition and proceed as in unvarnished surfaces.
Before applying
Application temperature: Above 5ºC. Ambient relative humidity: Less than 80%. Support humidity to be applied: Less than 8%
How to use
Remove the contents of the container well. Apply with good air renewal, in thin, uniform and well-extended layers. Do not dilute with diluents not recommended. Brush or Roller: Apply the first hand diluted 10-15% with polyurethane diluent (.9018). The second and third hands, slightly diluted (5%) or to use. Gun, depending on the nozzle and pressure used. Sand gently between layers to facilitate adhesion and improve finish.
Storage
Store in a cool place. Do not store open or started containers.
Calculate how much you need: