• Out-of-Stock
Water-based ecobarp fireproof varnish
search
  • Water-based ecobarp fireproof varnish

Water-based ecobarp fireproof varnish

Water-retardant varnish. Withstands the action of fire, is flame resistant.
4 l
750 ml
375 ml
C. TECHNIQUES
Colors
C. APPLICATION
Suitable for finishing and protection of interior and exterior surfaces: windows, doors, beams, trusses and ceilings.
High protection
Flame resistant.
Repels water
Resistant to weather and solar radiation
Decorate and enhance the natural beauty of wood.
High solids.
Tiempo de secado
Dilution Water
Tiempo de secado
T. Drying 30-60min
Tiempo de secado
T. Repainted 4-8hours
Tiempo de secado
Performance 11-14m2/L
Satin
colorless satin
Matte
matte colorless
Surface preparation

Surfaces should be clean, dry and consistent. On unprotected surfaces: Clean, sand and remove dust, grease, oil, waxes and small imperfections. Apply BARPIDECOR BOTTOM PRIMER TO WATER (Ref. B6811) as a complement to the treatment. To tone new woods or increase resistance to the outside, apply successive layers of BARPIDECOR TO WATER of the chosen color until you achieve the desired shade and finish with one or two hands of the WATER-FIREPROOF VARNISH. On tropical woods: previously apply a hand of TROPICAL WOOD INSULATING SEALANT (Ref. I6860) Apply 2-3 hands depending on the orientation and environmental conditions where the surface is exposed.

Before applying

Application temperature: Higher than 8ºC. Support temperature:Above 8ºC. Ambient relative humidity:Less than 80%. Stand Humidity: Less than 20%

How to use

Remove the contents of the container well. Apply with good air renewal, in thin, uniform and well-extended layers. Brush or Roller: Apply 1st hand diluted with Water 5-10%. 2nd and 3rd hand to use or dilute maximum 5%. Sand gently between layers.

Storage

Store in a cool place. Do not store open or started containers.

Calculate how much you need:

Total area
m2
nth Layers
Necessary amount --
Cookie consent