Paint for industrial floors of the highest quality.
15 l
4 l
750 ml
C. TECHNIQUES
Colors
C. APPLICATION
Suitable for interiors, concrete floors, cement mortars and other derivatives, garages, industrial buildings, parking, signage and sports courts.
Adherent and decorative finishes.
Great covering power.
Filling power.
Ease of application.
Resistant to abrasion, wear, scrubbing, chemical aggression and dirt in general.
It eliminates the formation of dust, prevents erosion and facilitates its cleaning.
Dilution.9303
T. Drying30min
T. Repainted24hours
Performance9-12m2/L
Semi-Matte
english red
semi-matte chrome green
semi-matte white
semi-matte yellow
grey 7038 semi-matte
Surface preparation
Surfaces should be sanded, clean, dry, free of dust, grease, oils and moisture. Clean, dry and well-set soil (28 days). Residual soil moisture: less than 6%. Preferably with roughness to improve adhesion. On unpainted surfaces: Apply the diluted product by 10-15% with Diluent Chlororubbers 300 as a preparation and then, two layers minimum, as it comes in the container or diluting with Diluent Chlororubber 300 (maximum 5%) On surfaces with old paint: Remove the paint in poor condition and proceed as on unpainted surface.
Before applying
Application temperature: Higher than 8ºC. Support temperature: Higher than 6ºC. Ambient relative humidity: Less than 80%. Stand Humidity: Less than 6%
How to use
Remove the contents of the container well. Apply with good air renewal, in thin, uniform and well-extended layers. Brush or Roller: Apply the diluted product 10-15% with Diluent Chlororubbers 300 as a preparation and then two layers minimum, as it comes in the container or diluting with Diluent Chlororubber 300 (maximum 5%)
Storage
Store in a cool place. Do not store open or started containers.
Calculate how much you need:
Total area
m2
nth Layers
Necessary amount--
Suitable for interiors, concrete floors, cement mortars and other derivatives, garages, industrial buildings, parking, signage and sports courts.
Surfaces should be sanded, clean, dry, free of dust, grease, oils and moisture. Clean, dry and well-set soil (28 days). Residual soil moisture: less than 6%. Preferably with roughness to improve adhesion. On unpainted surfaces: Apply the diluted product by 10-15% with Diluent Chlororubbers 300 as a preparation and then, two layers minimum, as it comes in the container or diluting with Diluent Chlororubber 300 (maximum 5%) On surfaces with old paint: Remove the paint in poor condition and proceed as on unpainted surface.
Before applying
Application temperature: Higher than 8ºC. Support temperature: Higher than 6ºC. Ambient relative humidity: Less than 80%. Stand Humidity: Less than 6%
How to use
Remove the contents of the container well. Apply with good air renewal, in thin, uniform and well-extended layers. Brush or Roller: Apply the diluted product 10-15% with Diluent Chlororubbers 300 as a preparation and then two layers minimum, as it comes in the container or diluting with Diluent Chlororubber 300 (maximum 5%)
Storage
Store in a cool place. Do not store open or started containers.
PINTURACLOROCAUCHOSUELOS
Data sheet
Family
Floor paint
Surface
Cement
Concrete
Feature Listed 1
ADHERENT AND DECORATIVE FINISHES.
Feature listed 2
GREAT COVERING POWER.
Subname
Paint for industrial floors of the highest quality.
Feature listed 3
FILLING POWER.
Barpicolor
No
Featured product 1
Adherent and decorative finishes.
Featured product 2
Great covering power.
Featured product 3
Filling power.
Featured product 4
Ease of application.
Featured product 5
Resistant to abrasion, wear, scrubbing, chemical aggression and dirt in general.
Featured product 6
It eliminates the formation of dust, prevents erosion and facilitates its cleaning.