Painting industrial floors of two components, interior, of the highest quality
16(12+4l.) l
4(3+1l.) l
C. TECHNIQUES
Colors
C. APPLICATION
Concrete floors, cement mortars and other derivatives indoors: garages, workshops, warehouses, industrial buildings, factories, car parks, etc.
High resistance
Antiskid
Filling power
Great covering power
Resistant to abrasion, chemical agents and dirt in general.
DilutionA9761
T. Drying5-6hours
T. Repainted12-24hours
Performance7-9m2/L
Bright
grey 7038 glossy
bright english red
bright chrome green
bright white
Surface preparation
Surfaces should be sanded, clean, dry, free of dust, grease, oils and moisture. Clean, dry and well-set soil (28 days) Preferably with roughness to improve adhesion. On unpainted surfaces: apply 3 hands: the 1st hand slightly diluted (maximum 5%), the 2nd and 3rd to use or slightly diluted (maximum 5%). On surfaces with old paints: Remove paint in poor condition and proceed as on unpainted surfaces
Before applying
Application temperature: Higher than 12ºC. Support temperature:Above 8ºC. Ambient relative humidity:Less than 75%. Residual soil moisture to be applied: Less than 6%
How to use
Remove the contents of the container well. Apply with good air renewal, in thin, uniform and well-extended layers. Prepare the amount to use: Proportion of the mixture (in volume): 3 parts of "A" and 1 part of "B". Proportion of the mixture (by weight): 4 parts of "A" and 1 part of "B". Shake until full incorporation. (Mixing machine). Let stand for 30 minutes. Percentage of application: Brush and Roller: Diluent (.9734) The 1st hand slightly diluted (maximum 5%), the 2nd and 3rd to use or slightly diluted (maximum 5%)
Storage
Store in a cool place. Do not store open or started containers.
Calculate how much you need:
Total area
m2
nth Layers
Necessary amount--
Concrete floors, cement mortars and other derivatives indoors: garages, workshops, warehouses, industrial buildings, factories, car parks, etc.
Surfaces should be sanded, clean, dry, free of dust, grease, oils and moisture. Clean, dry and well-set soil (28 days) Preferably with roughness to improve adhesion. On unpainted surfaces: apply 3 hands: the 1st hand slightly diluted (maximum 5%), the 2nd and 3rd to use or slightly diluted (maximum 5%). On surfaces with old paints: Remove paint in poor condition and proceed as on unpainted surfaces
Before applying
Application temperature: Higher than 12ºC. Support temperature:Above 8ºC. Ambient relative humidity:Less than 75%. Residual soil moisture to be applied: Less than 6%
How to use
Remove the contents of the container well. Apply with good air renewal, in thin, uniform and well-extended layers. Prepare the amount to use: Proportion of the mixture (in volume): 3 parts of "A" and 1 part of "B". Proportion of the mixture (by weight): 4 parts of "A" and 1 part of "B". Shake until full incorporation. (Mixing machine). Let stand for 30 minutes. Percentage of application: Brush and Roller: Diluent (.9734) The 1st hand slightly diluted (maximum 5%), the 2nd and 3rd to use or slightly diluted (maximum 5%)
Storage
Store in a cool place. Do not store open or started containers.
PINTURAEPOXISUELOSALDISOLVENTE
Data sheet
Family
Floor paint
Surface
Cement
Concrete
Feature Listed 1
HIGH RESISTANCE
Feature listed 2
ANTISKID
Subname
Painting industrial floors of two components, interior, of the highest quality
Feature listed 3
FILLING POWER
Barpicolor
No
Featured product 1
High resistance
Featured product 2
Antiskid
Featured product 3
Filling power
Featured product 4
Great covering power
Featured product 5
Resistant to abrasion, chemical agents and dirt in general.
