• Out-of-Stock
Epoxy paint water floors
search
  • Epoxy paint water floors

Epoxy paint water floors

Painting industrial floors of two components, water, interior, of the highest quality
18(16+2kg.) kg
4.5(4+0.5kg.) kg
C. TECHNIQUES
Colors
C. APPLICATION

Concrete floors, cement mortars and other derivatives indoors: garages, workshops, warehouses, industrial buildings, factories, car parks, etc.

High resistance
Antiskid
Filling power
Great covering power
Resistant to abrasion, chemical agents and dirt in general.
Tiempo de secado
Dilution Deionized water
Tiempo de secado
T. Drying 3-4hours
Tiempo de secado
T. Repainted 8-24hours
Tiempo de secado
Performance 5-8 m2/kg.
Pot Life
Pot life 5 h.
Semi-Matte
semi-matte chrome green
Satin
epoxy satin
grey 7038 satin
satin white
Colors
english red

Surface preparation

Surfaces should be sanded, clean, dry, free of dust, grease, oils and moisture. Clean, dry and well-set soil (28 days). Preferably with roughness to improve adhesion. On unpainted surfaces: apply 3 hands: the 1st hand slightly diluted (maximum 5%), the 2nd and 3rd to use or slightly diluted (maximum 5%). On surfaces with old paints: Remove paint in poor condition and proceed as on unpainted surfaces. For difficult supports (aged chlororubber paints, PVC, plastics, ceramic supports, etc.): Use the WHITE MATTE WATER EPOXY PRIMER (Ref. J6744) with MATTE WATER EPOXY PRIMER CATALYST (Ref. K0864) (See technical sheet) or consult the Technical Department.

Before applying

Application temperature: Higher than 12ºC less than 30ºC. Support temperature:Higher than 8ºC. Ambient relative humidity:Less than 80%. Residual soil moisture to be applied: Less than 6%

How to use

Remove the contents of the container well. Prepare the amount to use: Proportion of the mixture (by weight): 8 parts of "A" and 1 part of "B". The packaging of Component A is not provided filled in order to incorporate the entire contents of Component B. Shake until full incorporation. (Mixing machine). Let stand for 10 minutes. Apply with good air renewal, in thin, uniform and well-extended layers. Percentage of application, Brush and Roller: The 1st hand slightly diluted with Water (maximum 5%), the 2nd and 3rd to use or slightly diluted (maximum 5%)

Storage

Store in a cool place. Do not store open or started containers.

Calculate how much you need:

Total area
m2
nth Layers
Necessary amount --
Cookie consent