• Out-of-Stock
Painting of sports courts
search
  • Painting of sports courts

Painting of sports courts

Paint for sports courts, high decoration and quality
15 l
4 l
Barpicolor
C. TECHNIQUES
Colors
C. APPLICATION

Suitable for protection and decoration of concrete surfaces, cement mortars, asphalts, sports facilities, tennis courts and pediments.

Hard and flexible finishes
Weather resistance
Ease of application.
Great covering power.
Abrasion resistant
It eliminates the formation of dust in the soil and improves its surface hardness.
Tiempo de secado
Dilution Water
Tiempo de secado
T. Drying 30min
Tiempo de secado
T. Repainted 3-5hours
Tiempo de secado
Performance 7-9m2/L
Semi-Matte
red tennis
semi-matte chrome green
semi-matte white
semi-matte grey
semi-matte blue

Surface preparation

Surfaces must be sanded, clean, dry, without grease, saltpeter, old paints, and must be consistent, free of loose, crumbly and chipped parts. Preferably with roughness to improve adhesion. On unpainted surfaces: Apply 2 or 3 layers of the same product. First hand diluting slightly (maximum 10%) with water, the 2nd and 3rd slightly diluted (maximum 5%) or to use. On surfaces with old paint: Remove paint in poor condition, soft parts, crumbly, chipped, etc. Seal properly with SELLAFOND (Ref. 1764) and proceed as on unpainted surfaces.

Before applying

Application temperature: Higher than 8ºC. Support temperature:Above 8ºC. Ambient relative humidity:Less than 80%. Support humidity: Less than 8%.

How to use

Remove the contents of the container well. Apply with good air renewal, in thin, uniform and well-extended layers. Percentage of application: Brush and Roller, 1st hand slightly diluted (maximum 10%), 2nd and 3rd hand to use or slightly diluted (maximum 5%). Airless gun, depending on the nozzle and pressure used in the application.

Storage

Store in a cool place. Do not store open or started containers.

Calculate how much you need:

Total area
m2
nth Layers
Necessary amount --
Cookie consent