• Out-of-Stock
BarPro10
search
  • BarPro10

BarPro10

Modified acrylic decorative paint of maximum opacity
15 l
4 l
C. TECHNIQUES
Colors
C. APPLICATION

Suitable for decoration of interior surfaces, and occasionally outdoors, such as plaster and plaster walls and ceilings. Also for decoration work in general.

Anti-mold preservative
High coverage
Extra white
Easy to apply
Maximum opacity
Matte, smooth, uniform and very decorative finishes.
Tiempo de secado
Dilution Water
Tiempo de secado
T. Drying 30-40min
Tiempo de secado
T. Repainted 18hours
Tiempo de secado
Performance 8-10m2/L
Matte
matte white

Surface preparation

Surfaces should be clean, dry, free of dust, grease, saltpeter, chipped and consistent. On dry and hard unpainted surfaces (well-set plaster): application of 2 hands: the first diluted by 10% and the second slightly diluted (maximum by 5%) or on use. On soft surfaces (poorly set plaster) or with old plastic paints, tempera, lime and other paints: Remove soft, crumbly, chipped parts, etc. and remove all lime. Then seal with SELLAFOND AL AGUA (.1894) and proceed as on unpainted surfaces.

Before applying

Application temperature: Above 5ºC. Ambient relative humidity: Less than 80%

How to use

Remove the contents of the container well. Apply with good air renewal, in thin, uniform and well-extended layers. Percentage of application: Brush and Roller, Water The 1st hand slightly diluted (maximum 10-15%), the 2nd to use or slightly diluted (maximum 5%), Airless gun, depending on the nozzle and pressure used.

Storage

Store in a cool place. Do not store open or started containers.

Calculate how much you need:

Total area
m2
nth Layers
Necessary amount --
Cookie consent