• Out-of-Stock
Pliobarp stony smooth
search
  • Pliobarp stony smooth

Pliobarp stony smooth

Smooth stone lining
15 l
4 l
Barpicolor
C. TECHNIQUES
Colors
C. APPLICATION

Suitable for protection and decoration of facades, party walls and patios of lights ..., with matt rustic finish.

Resistant to erosion and weathering.
Extra white
Great covering power.
Filling power.
Uniform finishes
Adhesion on cement mortars
Tiempo de secado
Dilution Water
Tiempo de secado
T. Drying 30min
Tiempo de secado
T. Repainted 2-4hours
Tiempo de secado
Performance 6-8m2/L
Matte
matte white
intact 60* matte

Surface preparation

Surfaces should be clean, dry, free of dust, grease, oils, moisture, saltpeter, chipped and consistent. On new surfaces (cement mortar without saltpeter), apply 2-3 crossed layers: the 1st hand diluted with a maximum of 10% water, rest to use or slightly diluted (maximum 5%). On soft surfaces (mortars in poor condition) or with saltpeters, old plastic paints, lime and other paints: Remove soft, crumbly, chipped and damp parts. Also remove lime and saltpeters. Seal properly with SELLAFOND (Ref .1764) and proceed as in the previous case.

Before applying

Application temperature: Above 5ºC. Ambient relative humidity: Less than 80%. Support temperature above 8ºC.

How to use

Remove the contents of the container well. Apply in uniform layers. Apply with good air renewal. Application to brush, roller and airless gun. Do not apply if there is a risk of rain and frost. It is not convenient to apply in full sun and with high temperatures of the support.

Storage

Store in a cool place. Do not store open or started containers.

Calculate how much you need:

Total area
m2
nth Layers
Necessary amount --
Cookie consent