Suitable for protection and decoration of facades, party walls and patios of lights ..., with high quality matte finish. It can serve as a matte-looking finish on interiors that need special protection.
Resistant to erosion and weathering.
Ease of application.
Maximum performance.
Great covering power
Uniform finishes
Waterproof finishes
DilutionWater
T. Drying30min
T. Repainted2-4hours
Performance8-11m2/L
Matte
matte white
intact 60* matte
Surface preparation
Surfaces should be clean, dry, free of dust, grease, oils, moisture, saltpeter, chipped and consistent. On new surfaces (cement mortar without saltpeter), apply 2-3 crossed layers: the 1st hand diluted with a maximum of 10% water, rest to use or slightly diluted (maximum 5%). On soft surfaces (mortars in poor condition) or with saltpeters, old plastic paints, lime and other paints: Remove soft, crumbly, chipped and damp parts. Also remove lime and saltpeters. Seal properly with SELLAFOND (Ref .1764) and proceed as in the previous case.
Before applying
Application temperature: Above 5ºC. Ambient relative humidity: Less than 80%. Support temperature above 8ºC.
How to use
Remove the contents of the container well. Apply in uniform layers. Apply with good air renewal. Application to brush, roller and airless gun. Do not apply if there is a risk of rain and frost. It is not convenient to apply in full sun and with high temperatures of the support.
Storage
Store in a cool place. Do not store open or started containers.
Calculate how much you need:
Total area
m2
nth Layers
Necessary amount--
Suitable for protection and decoration of facades, party walls and patios of lights ..., with high quality matte finish. It can serve as a matte-looking finish on interiors that need special protection.
Surfaces should be clean, dry, free of dust, grease, oils, moisture, saltpeter, chipped and consistent. On new surfaces (cement mortar without saltpeter), apply 2-3 crossed layers: the 1st hand diluted with a maximum of 10% water, rest to use or slightly diluted (maximum 5%). On soft surfaces (mortars in poor condition) or with saltpeters, old plastic paints, lime and other paints: Remove soft, crumbly, chipped and damp parts. Also remove lime and saltpeters. Seal properly with SELLAFOND (Ref .1764) and proceed as in the previous case.
Before applying
Application temperature: Above 5ºC. Ambient relative humidity: Less than 80%. Support temperature above 8ºC.
How to use
Remove the contents of the container well. Apply in uniform layers. Apply with good air renewal. Application to brush, roller and airless gun. Do not apply if there is a risk of rain and frost. It is not convenient to apply in full sun and with high temperatures of the support.
Storage
Store in a cool place. Do not store open or started containers.
Colores A Carta-4
Data sheet
Family
Facade cladding
Surface
Cement
Concrete
Facades
Feature Listed 1
RESISTANT TO EROSION AND WEATHERING.
Feature listed 2
EASE OF APPLICATION.
EASE OF APPLICATION.
Subname
Special cladding for facades
Feature listed 3
MAXIMUM PERFORMANCE.
Barpicolor
Sí
Featured product 1
Resistant to erosion and weathering.
Featured product 2
Ease of application.
Ease of application.
Featured product 3
Maximum performance.
Featured product 4
Great covering power
Featured product 5
Uniform, smooth, matte finishes that hide the defects of the plastering.
Uniform finishes
Featured product 6
Waterproof finishes
Waterproof finishes, but permeable to the interior humidity of the substrates, which allows their elimination constantly and gradually.
i-dilution
Water
i-t.drying
30min
Product Featured 7
Adhesion on cement mortars
Adhesion on cement mortars, concrete, fiber cement and other materials used in construction.
i-t.repainted
2-4hours
i-performance
8-11m2/L
i-n layers
2-3
I calculate performance
9
Water / solvent
Water
I calculate layers
2
s-certificate euroclasses 1
No
s-certified slippage 2
No
s-certified anticorrosive enamels 3
No
s-certified mushrooms 4
No
s-bacterial certificate 5
No
s-certificate guarantee three 6
No
s-certificate warranty five 7
Sí
s-certificate guarantee seven 8
No
s-certificate guarantee eight 9
No
s-certificate guarantee ten 10
No
s-certificate guarantee fifteen 11
No
s-certificate A 12
No
s-certificate A+ 13
No
s-certificate B 14
No
s-certificate C 15
No
s-certificate anti-mold preservative 16
No
s-certified UV filter 17
No
s-ecolabel 18 certificate
No
s-CE certificate 19
No
s-certificate anticarbonation 20
No
s-certificate Pliolite 21
No
s-certificate cidemco 22
No
fiber cement and other materials used in construction.
26
matte and that disguise the defects of the plastering.
24
which allows its elimination constantly and gradually.
Suitable for protection and decoration of facades, party walls and patios of lights ..., with high quality matte finish. It can serve as a matte-looking finish on interiors that need special protection.
