• Out-of-Stock
Barpikril smooth facades
search
  • Barpikril smooth facades

Barpikril smooth facades

Facade cladding of the highest quality, flexible, waterproof and breathable.
15 l
4 l
Barpicolor
C. TECHNIQUES
Colors
C. APPLICATION

Suitable for decoration, protection and waterproofing of facades, walls, and mortars of cement, concrete, etc. Especially suitable on surfaces that require high protection to the outside.

Anti-carbonation protection
Self-cleaning
Excellent performance
Resistant to alkalinity and salinity of the support
Weatherproof
Ease of application.
Tiempo de secado
Dilution Water
Tiempo de secado
T. Drying 30-40min
Tiempo de secado
T. Repainted 2-4hours
Tiempo de secado
Performance 9-12m2/L
Matte
matte white
intact 120* matte

Surface preparation

Surfaces should be clean, dry, free of dust, grease, oils, moisture, chipped and consistent. On new surfaces (cement mortar without saltpeter), apply 2-3 crossed layers: the 1st hand diluted with 5% water, rest to use or slightly diluted. On soft surfaces (mortars in poor condition) or with saltpeters, old plastic paints, lime and other paints: Remove soft, crumbly, chipped and damp parts. Also remove lime and saltpeters. Seal properly with SELLAFOND (Ref.: .1764) and proceed as in the previous case.

Before applying

Application temperature: Above 5ºC. Ambient relative humidity: Less than 80%. Support temperature above 8ºC.

How to use

Remove the contents of the container well. Apply in uniform layers. Apply with good air renewal. Application to brush, roller and airless gun. Do not apply if there is a risk of rain and frost. It is not convenient to apply in full sun and with high temperatures of the support.

Storage

Store in a cool place. Do not store open or started containers.

Calculate how much you need:

Total area
m2
nth Layers
Necessary amount --
Cookie consent