• Out-of-Stock
Silicate paint
search
  • Silicate paint

Silicate paint

Inorganic coating of mineral structure based on stabilized potassium silicate binder
15 l
4 l
C. TECHNIQUES
Colors
C. APPLICATION
Suitable for protection and decoration of interiors, facades and new construction ..., in restoration and rehabilitation of buildings of historical-artistic character. Suitable for concrete surface facades, mortars and fiber cement. This coating reacts with substrate material resulting in a mineral, adherent, insoluble and firm bond.
Anticarbonation
Adherent, insoluble and firm
Weatherproof.
Good resistance to alkalinity.
Ease of application.
Great covering power.
Tiempo de secado
Dilution Water
Tiempo de secado
T. Drying 30min
Tiempo de secado
T. Repainted 1-2hours
Tiempo de secado
Performance 9-11m2/L
Matte
matte white
Surface preparation

Surfaces should be clean, dry, free of dust, grease, oils, moisture, saltpeter, chipped and consistent. On hard and dry surfaces (cement mortar without saltpeter), apply 2 layers: the 1st hand diluted with a maximum of 10% water, rest to use or slightly diluted (maximum 5%). On soft surfaces (mortars in poor condition) or with saltpeters, old plastic paints, lime and other paints: Remove soft, crumbly, chipped and damp parts. Also remove lime and saltpeters. Apply the very diluted product (greater than 10%) as a sealant and proceed as in the previous case. On plaster interiors do not apply directly, seal properly with SELLAFOND AL AGUA (Ref.1894) and proceed as in the previous case.

Before applying

Application temperature: Above 5ºC. Ambient relative humidity: Less than 80%. Support temperature above 8ºC.

How to use

Remove the contents of the container well. Apply in uniform layers. Apply with good air renewal. Application to brush, roller. Do not apply if there is a risk of rain and frost. It is not convenient to apply in full sun and with high temperatures of the support. Percentage of application: Brush and Roller, Water, The 1st hand slightly diluted (maximum 10%), the 2nd to use or slightly diluted (maximum 5%)

Storage

Store in a cool place. Do not store open or started containers.

Calculate how much you need:

Total area
m2
nth Layers
Necessary amount --
Cookie consent