- Out-of-Stock
MM Multisurfaces Multilak...
- Out-of-Stock
Suitable for treatment and preparation of soft bottoms, surfaces with anchoring problems, bad plastering, sandy and crumbly mortars and surfaces with lime residues, tempering, etc. Provides the bottom with filling, strengthening and hardness.
Surface preparation
Surfaces should be clean, dry, free of dust, grease, oils, saltpeter, moisture, chipped and consistent. Apply two successive hands wet on wet. In each hand, apply until the support is saturated (proceed by small surfaces, so that the product is applied after having absorbed the previous hand). Do not apply more than the bottom can absorb. The surface must be semi-matte.
Before applying
Application temperature: Higher than 5ºC. Ambient relative humidity: Less than 80% Support humidity: 6%. Support temperature above 5ºC.
How to use
Remove the contents of the container well. Apply with good air renewal, in uniform and well-extended layers.
Storage
Store in a cool place. Do not store open or started containers.
Calculate how much you need: