• Out-of-Stock
Sellafond water
search
  • Sellafond water

Sellafond water

Sealant for fixing soft, absorbent, alkalinity bottoms
15 l
4 l
750 ml
C. TECHNIQUES
Colors
C. APPLICATION

Water sealant for fixing soft, crumbly and absorbent bottoms indoors. Provides the bottom with filling, strengthening and hardness. Also suitable for finishing facades of exposed brick, stone, concrete, mortars and decorative rough coatings.

Penetrating.
Filling power.
High sealing power.
Very permeable to the interior humidity of the substrate
Regulates the absorption of the fund.
Resistant to alkalinity of substrates

Tiempo de secado
Dilution 1 part of product up to 4 of water
Tiempo de secado
T. Drying 1-2hours
Tiempo de secado
T. Repainted 2-4hours
Tiempo de secado
Performance 6-10m2/L
Semi-Matte
semi-matte colorless

Surface preparation

Surfaces should be clean, dry, free of dust, grease, oils, saltpeter, moisture, chipped and consistent. Sand if necessary. Dilute the product with water 300-400% (1 part of product by 3-4 parts of water) Apply two successive hands wet on wet. In each hand, apply until the support is saturated (proceed by small surfaces, so that the product is applied after having absorbed the previous hand). Do not apply more than the bottom can absorb. The surface must be semi-matte.

Before applying

Application temperature: Higher than 5ºC. Ambient relative humidity: Less than 80% Support humidity: 6%. Support temperature above 5ºC.

How to use

Remove the contents of the container well. Apply with good air renewal, in uniform and well-extended layers. Percentage of application: Brush and Gun, Water, dilute with water up to 300 – 400% (1 part of product per 3-4 parts of water) depending on structure and absorption of the bottom. On very porous funds admits dilutions of up to 500-600%

Storage

Store in a cool place. Do not store open or started containers.

Calculate how much you need:

Total area
m2
nth Layers
Necessary amount --
Cookie consent