- Out-of-Stock
MM Multisurfaces Multilak...
- Out-of-Stock
Surfaces should be clean, dry, free of dust, grease, oils, saltpeter, moisture, chipped and consistent. Sand if necessary. Dilute the product with water up to 400% (1 part of product by 4 parts of water) depending on the use, structure and absorption of the support.
Before applying
Application temperature: Higher than 5ºC. Ambient relative humidity: Less than 80% Support humidity: 6%. Support temperature above 5ºC.
How to use
Remove the contents of the container well. Apply with good air renewal, in uniform and well-extended layers. Percentage of application: Brush and Gun, Water, dilute with water up to 400% (1 part of product per 3-4 parts of water) depending on structure and absorption of the bottom.
Storage
Store in a cool place. Do not store open or started containers.
Surfaces should be clean, dry, free of dust, grease, oils, saltpeter, moisture, chipped and consistent. Sand if necessary. Dilute the product with water up to 400% (1 part of product by 4 parts of water) depending on the use, structure and absorption of the support.
Before applying
Application temperature: Higher than 5ºC. Ambient relative humidity: Less than 80% Support humidity: 6%. Support temperature above 5ºC.
How to use
Remove the contents of the container well. Apply with good air renewal, in uniform and well-extended layers. Percentage of application: Brush and Gun, Water, dilute with water up to 400% (1 part of product per 3-4 parts of water) depending on structure and absorption of the bottom.
Storage
Store in a cool place. Do not store open or started containers.
Data sheet