Multiplast plastic putty

Putty indicated for the recovery of small holes, marks, fissures and cracks of non-structural origin inside.
0.750 kg
0.350 kg
5 kg
C. TECHNIQUES
Colors
C. APPLICATION
Suitable for renovation of old bottoms and repair of scratches, bumps and microcracks (plaster, plaster, cement, conventional plastic paint, plasticized drip, fiberglass fabric.), for the retapping of wood pores.
Excellent workability.
Easy sanding and smoothing
It doesn't hang up.
It is not mounted or rolled in the joints.
Great covering power.

Tiempo de secado
Dilution Not accurate
Tiempo de secado
T. Drying 10-12hours
Tiempo de secado
Performance 0.65 Kg/m2
Colors
white
Surface preparation

The surface has to be clean, dry, without grease, dust, saltpeter, chipped and be consistent.

Before applying

Application temperature: Above 5ºC. Ambient relative humidity: Less than 80%

How to use

Product ready for use. Make application proceeding to the filling of irregularities and always smoothing vertically from bottom to top. The joints are made on the contrary, from top to bottom. Sanded once dry and hard, reapply a second hand horizontally from right to left, taking the joints from left to right. After drying, sand and proceed to paint.

Storage

Store in a cool place. Do not store open or started containers.

Cookie consent