• Out-of-Stock
Multiplast exterior to use
search
  • Multiplast exterior to use

Multiplast exterior to use

Plastered in light paste and reinforced with fiberglass intended for the filling of imperfections and the leveling of irregularities in absorbent supports both in thin layer and thickness.
0.750 kg
0.350 kg
5 kg
C. TECHNIQUES
Colors
C. APPLICATION
Special for plastering is cement supports, brick partitions, concrete, stone and painted backgrounds of walls to the outside. Suitable for removing imperfections, gaps and cracks on (plaster, cement, concrete, plasterboard,...) Smoothing, repair and sealing of wooden surfaces (furniture, doors ..), decorative elements of plaster and polystyrene. Leveling of irregular substrates. Repairs non-moving and non-structure cracks
Excellent filling capacity.
It can be tinted.
Minimal shrinkage.
Excellent adhesion, great cohesion and hardness.
Ease of applying, smoothing and sanding.
Tiempo de secado
Dilution Not accurate
Tiempo de secado
T. Drying 24hours
Tiempo de secado
Performance layer of 1 mm 1.45-1.65 Kg/m2
Colors
white
Surface preparation

The surface has to be clean, dry, without grease, dust, saltpeter, chipped and be consistent.

Before applying

Application temperature: Above 5ºC. Ambient relative humidity: Less than 80%

How to use

Product ready for use. Make application proceeding to the filling of irregularities and always smoothing vertically from bottom to top. The joints are made on the contrary, from top to bottom. Sanded once dry and hard, reapply a second hand horizontally from right to left, taking the joints from left to right. After drying, sand and proceed to paint.

Storage

Store in a cool place. Do not store open or started containers.

Cookie consent