• Out-of-Stock
Fungifin plus
search
  • Fungifin plus

Fungifin plus

Highly effective paint, based on high-strength pigments and special resins in aqueous medium.
15 l
4 l
750 ml
C. TECHNIQUES
Colors
C. APPLICATION

Suitable for interior decoration of premises with high humidity and temperature, such as cellars, food industrial and laundries with effective and prolonged protection in their film from stains and molds.

Ease of application.
Great covering power.
Filling power.
Finish with maximum whiteness.
Paint with anti-mold preservative
Tiempo de secado
Dilution Water
Tiempo de secado
T. Drying 30-60min
Tiempo de secado
T. Repainted 2-4hours
Tiempo de secado
Performance 8-10m2/L
Matte
matte white
intact 60* matte

Surface preparation

Surfaces should be clean, dry, free of dust, grease, saltpeter, chipped and consistent. In case of moldy surfaces, clean and disinfect the affected areas with hydrogen peroxide and let dry before applying the paint. On dry and hard surfaces (well-set plaster): application of 2 hands: the first diluted by 10% and the second to use or slightly diluted (maximum 5%). On soft surfaces (poorly set plaster) or with old plastic paints, tempera, lime and other paints: Remove soft, crumbly, chipped parts, etc. and remove all lime. Then seal with SELLAFOND AL AGUA (.1894) and proceed as on unpainted surfaces.

Before applying

Application temperature: Above 5ºC. Ambient relative humidity: Less than 80%

How to use

Remove the contents of the container well. Apply with good air renewal, in thin, uniform and well-extended layers. Percentage of application: Brush and roller, Water The 1st hand diluted to 10%, the 2nd to use or slightly diluted (maximum 5%) 1st hand diluted, Airless gun depending on the nozzle and pressure used.

Storage

Store in a cool place. Do not store open or started containers.

Calculate how much you need:

Total area
m2
nth Layers
Necessary amount --
Cookie consent