Suitable for decorating and protecting interior and exterior surfaces such as doors, railings, fences, balconies, gates, garden furniture, metal surfaces, wood, plaster, etc.
Great covering power
Antioxidant
Unalterable colors
Resistant to friction, wear and washing.
Product with sunscreen
Provides durable, adherent, unalterable, silky and soft finishes
Dilution.9873
T. Drying5-6 h.
T. Repainted24 h.
Performance10-13 m2/l.
Matte
matte white
matte black
Satin
barpsint ad* satin
Surface preparation
On unpainted surfaces: Sand, clean and remove dust, grease, oil, waxes and small imperfections. On surfaces with old paints: Remove paint in poor condition and proceed as on unpainted surfaces.
Before applying
Do not apply at temperatures below 10ºC. Relative humidity of application Less than 80%. Support temperature Greater than 8ºC. Recommended layer thickness 30 – 40 microns per hand
How to use
Remove the contents of the container well. Once the surface is prepared, apply different primers: On wood and plaster: Apply SEALING PRIMER (Ref. 1717). On iron and steel: Apply SYNTHETIC MINIO (Ref. A1966) or one of our ANTIOXIDANT PRIMERS. On galvanized and light metals: Apply some sample MULTI-ADHERENT PRIMERS. Apply with brush or roller, 1st hand to use or slightly diluted (maximum 5%) with Synthetic and Fatty Diluent 250 (Ref. 9873). The other hands, in use or slightly diluted (maximum 5%), for gun depending on the nozzle and pressure used. Application temperature higher than 10ºC. Repainte two or three layers of the product, leaving the stipulated time between layers. Apply with good air renewal, in thin, uniform and well-extended layers. If you have any questions, please consult the Technical Department.
Storage
Store in a cool place. Do not store open or started containers
Calculate how much you need:
Total area
m2
nth Layers
Necessary amount--
Suitable for decorating and protecting interior and exterior surfaces such as doors, railings, fences, balconies, gates, garden furniture, metal surfaces, wood, plaster, etc.
On unpainted surfaces: Sand, clean and remove dust, grease, oil, waxes and small imperfections. On surfaces with old paints: Remove paint in poor condition and proceed as on unpainted surfaces.
Before applying
Do not apply at temperatures below 10ºC. Relative humidity of application Less than 80%. Support temperature Greater than 8ºC. Recommended layer thickness 30 – 40 microns per hand
How to use
Remove the contents of the container well. Once the surface is prepared, apply different primers: On wood and plaster: Apply SEALING PRIMER (Ref. 1717). On iron and steel: Apply SYNTHETIC MINIO (Ref. A1966) or one of our ANTIOXIDANT PRIMERS. On galvanized and light metals: Apply some sample MULTI-ADHERENT PRIMERS. Apply with brush or roller, 1st hand to use or slightly diluted (maximum 5%) with Synthetic and Fatty Diluent 250 (Ref. 9873). The other hands, in use or slightly diluted (maximum 5%), for gun depending on the nozzle and pressure used. Application temperature higher than 10ºC. Repainte two or three layers of the product, leaving the stipulated time between layers. Apply with good air renewal, in thin, uniform and well-extended layers. If you have any questions, please consult the Technical Department.
Storage
Store in a cool place. Do not store open or started containers
Colores A Carta-375
Data sheet
Product Types
Enamel
Surface
Galvanized
Iron
Light metals
Plaster
Steel
Wood
Feature Listed 1
GREAT COVERING POWER
Feature listed 2
ANTIOXIDANT
Subname
Synthetic enamel high decoration.
Feature listed 3
UNALTERABLE COLORS
Barpicolor
No
Featured product 1
Great covering power
Featured product 2
Antioxidant
Featured product 3
Unalterable colors
Featured product 4
Resistant to friction, wear and washing.
Featured product 5
Product with sunscreen
Featured product 6
Provides durable, adherent, unalterable, silky and soft finishes
Suitable for decorating and protecting interior and exterior surfaces such as doors, railings, fences, balconies, gates, garden furniture, metal surfaces, wood, plaster, etc.
