Suitable for decorating and protecting interior and exterior surfaces such as doors, railings, fences, balconies, gates, windows, agricultural machinery, radiators, public works and industrial facilities.
Anti-corrosion finishes
Unalterable colors
Great covering power.
Weatherproof, even in adverse conditions.
Ease of application.
Dilution.9873
T. Drying4-5 h.
T. Repainted24hours
Performance11-13m2/L
Bright
bright white
glossy black
brilliant silver
green carriage bright
bright red carriage
bright pearl grey
bright brown
bright navy blue
bright ivory
Surface preparation
On unpainted surfaces: Sand, clean and remove dust, grease, oil, waxes and small imperfections. Completely remove rust and lamination crusts by sanding, scratching or blasting. On surfaces with old paints: Remove paint in poor condition and proceed as on unpainted surfaces.
Before applying
Do not apply at temperatures below 10ºC. Ambient relative humidity below 80%. Support temperature above 8ºC. Recommended layer thickness 30-40 Microns per hand
How to use
Remove the contents of the container well. Apply with good air renewal, in thin, uniform and well-extended layers. This product allows direct application on multiple supports without the need for primer, but also allows to apply several systems with first layers of primer on different materials in painting processes such as: Wood and plaster: Apply WHITE SEALING PRIMER (Ref. 1717). On galvanized and light metals: Apply some of our MULTI-ADHERENT PRIMERS Then apply two or three layers of the product, leaving the repainting time between layers. On iron and steel: Apply any of our ANTIOXIDANT PRIMERS or directly apply 2 or 3 layers of the product, dilute the first hand slightly (maximum 5%) with Synthetic and Fatty Diluent 250 (Ref. 9873). Apply the following layers leaving the repainting time between them. To give maximum antioxidant protection apply a first layer of CONVERTOXIDE (Ref. 9808). Apply with brush or roller, 1st hand to use or slightly diluted (maximum 5%) with Synthetic and Fatty Diluent 250 (Ref. 9873). The other hands, in use or slightly diluted (maximum 5%), for gun depending on the nozzle and pressure used. Application temperature higher than 10ºC. Apply two or three layers of the product, leaving the repainting time between layers. If you have any questions, please consult the Technical Department.
Storage
Store in a cool place. Do not store open or started containers.
Calculate how much you need:
Total area
m2
nth Layers
Necessary amount--
Suitable for decorating and protecting interior and exterior surfaces such as doors, railings, fences, balconies, gates, windows, agricultural machinery, radiators, public works and industrial facilities.
On unpainted surfaces: Sand, clean and remove dust, grease, oil, waxes and small imperfections. Completely remove rust and lamination crusts by sanding, scratching or blasting. On surfaces with old paints: Remove paint in poor condition and proceed as on unpainted surfaces.
Before applying
Do not apply at temperatures below 10ºC. Ambient relative humidity below 80%. Support temperature above 8ºC. Recommended layer thickness 30-40 Microns per hand
How to use
Remove the contents of the container well. Apply with good air renewal, in thin, uniform and well-extended layers. This product allows direct application on multiple supports without the need for primer, but also allows to apply several systems with first layers of primer on different materials in painting processes such as: Wood and plaster: Apply WHITE SEALING PRIMER (Ref. 1717). On galvanized and light metals: Apply some of our MULTI-ADHERENT PRIMERS Then apply two or three layers of the product, leaving the repainting time between layers. On iron and steel: Apply any of our ANTIOXIDANT PRIMERS or directly apply 2 or 3 layers of the product, dilute the first hand slightly (maximum 5%) with Synthetic and Fatty Diluent 250 (Ref. 9873). Apply the following layers leaving the repainting time between them. To give maximum antioxidant protection apply a first layer of CONVERTOXIDE (Ref. 9808). Apply with brush or roller, 1st hand to use or slightly diluted (maximum 5%) with Synthetic and Fatty Diluent 250 (Ref. 9873). The other hands, in use or slightly diluted (maximum 5%), for gun depending on the nozzle and pressure used. Application temperature higher than 10ºC. Apply two or three layers of the product, leaving the repainting time between layers. If you have any questions, please consult the Technical Department.
Storage
Store in a cool place. Do not store open or started containers.
Suitable for decorating and protecting interior and exterior surfaces such as doors, railings, fences, balconies, gates, windows, agricultural machinery, radiators, public works and industrial facilities.
