- Out-of-Stock
MM Multisurfaces Multilak...
- Out-of-Stock
Sand and clean if necessary to remove dust, grease, oil, moisture, old or spoiled paints, rust and rolling crusts by sanding, scratching or blasting.
Before applying
Do not apply at temperatures below 8ºC. Ambient relative humidity below 80%. Support temperature above 8ºC. Recommended layer thickness 25-35 microns
How to use
Remove the contents of the container well. Apply with good air renewal, in thin, uniform and well-extended layers. Apply one or two hands. Brush and roller: Synthetic and Fatty Diluent 250 (Ref. 9873) to use or slightly diluted (maximum 5%). Gun: depending on the nozzle and pressure used in the application.
Storage
Store in a cool place. Do not store open or started containers.
Calculate how much you need: