• Out-of-Stock
Convertoxide
search
  • Convertoxide

Convertoxide

Oxide-to-water converter, in contact with the oxide, form a stable chemical complex of black color, creating a neutral protective layer that prevents the oxide from evolving.
1 l
500 ml
C. TECHNIQUES
Colors
C. APPLICATION

Suitable for the deoxidizing preparation of rusty iron and steel surfaces. Suitable for anti-corrosion treatment of elements, parts, iron and steel structures, small repairs and patching in machines, appliances and vehicles.

Ease of application.
Penetrates into the rust.
Moisture
It reacts, stabilizes, fixes and transforms the oxide into a neutral protective layer that prevents the oxide from spreading.
Adhesion between subsequent layers of finishing.
Tiempo de secado
Dilution Not accurate
Tiempo de secado
T. Drying 60min
Tiempo de secado
T. Repainted 6hours
Tiempo de secado
Performance 9-12m2/L
Colors
ivory

Surface preparation

Completely remove loose rust from the surface, as well as dust, greases, oils, moisture and old or spoiled paints. Apply one or two hands of CONVERTOXIDE, leaving the repainting time between layers. Apply MINIO SYNTHETIC primers (A1966) or ANTIOXIDANT PRIMER in the desired color and finish with finishing layers: VIKING, BARPSINT HIGH DECORATION, ANTIOXIDANT ENAMEL, etc.

Before applying

Do not apply at temperatures below 10ºC. Ambient relative humidity below 80%. Support temperature above 8ºC.

How to use

Remove the contents of the container well. Apply with good air renewal, in thin, uniform and well-extended layers. It is not recommended to dilute. Separate in a container separate from the original the amount that is needed and not return the excess to the original container thus avoiding its reaction due to contamination.

Storage

Store in a cool place. Do not store open or started containers. Store in rooms protected from frost.

Calculate how much you need:

Total area
m2
nth Layers
Necessary amount --
Cookie consent