Suitable for protection, adhesion and decoration of galvanized steel surfaces, cold rolled steel, aluminum, brass, copper, other light alloys, PVC and wood.
Ease of application.
Great covering power.
Increased adhesion
Adhesion on different substrates.
Dilution.9971
T. Drying2-3h
T. Repainted10-12hours
Performance7-10m2/L
Matte
matte grey
matte white
english red
Surface preparation
On unpainted surfaces: Sand, clean and remove dust, grease, oil, waxes and small imperfections. On surfaces with old paints: Remove paint in poor condition and proceed as on unpainted surfaces.
Before applying
Do not apply at temperatures below 10ºC. Ambient relative humidity below 80%. Support temperature above 8ºC. Recommended layer thickness 30 – 40 microns per hand
How to use
Remove the contents of the container well. Apply with good air renewal, in thin, uniform and well-extended layers. Apply one or more layers until covering the substrate. Brush and roller: Fast Drying Synthetic Diluent (Ref. 9971) to use or slightly diluted (maximum 5%). Gun: depending on the nozzle and pressure used in the application.
Storage
Store in a cool place. Do not store open or started containers.
Calculate how much you need:
Total area
m2
nth Layers
Necessary amount--
Suitable for protection, adhesion and decoration of galvanized steel surfaces, cold rolled steel, aluminum, brass, copper, other light alloys, PVC and wood.
On unpainted surfaces: Sand, clean and remove dust, grease, oil, waxes and small imperfections. On surfaces with old paints: Remove paint in poor condition and proceed as on unpainted surfaces.
Before applying
Do not apply at temperatures below 10ºC. Ambient relative humidity below 80%. Support temperature above 8ºC. Recommended layer thickness 30 – 40 microns per hand
How to use
Remove the contents of the container well. Apply with good air renewal, in thin, uniform and well-extended layers. Apply one or more layers until covering the substrate. Brush and roller: Fast Drying Synthetic Diluent (Ref. 9971) to use or slightly diluted (maximum 5%). Gun: depending on the nozzle and pressure used in the application.
Storage
Store in a cool place. Do not store open or started containers.