- Out-of-Stock
MM Multisurfaces Multilak...
- Out-of-Stock
On unpainted surfaces: Sand, clean and remove dust, grease, oil, waxes and small imperfections. On surfaces with old paints: Remove paint in poor condition and proceed as on unpainted surfaces.
Before applying
Do not apply at temperatures below 10ºC. Ambient relative humidity below 80%. Support temperature above 8ºC. Recommended layer thickness 30 – 40 microns per hand
How to use
Remove the contents of the container well. Apply with good air renewal, in thin, uniform and well-extended layers. Apply one or more layers until covering the substrate. Brush and roller: Fast Drying Synthetic Diluent (Ref. 9971) to use or slightly diluted (maximum 5%). Gun: depending on the nozzle and pressure used in the application.
Storage
Store in a cool place. Do not store open or started containers.
Calculate how much you need: