- Out-of-Stock
MM Multisurfaces Multilak...
- Out-of-Stock
On surfaces in wood without protector and without varnish: Clean, sand and remove dust, grease, oil, waxes and small imperfections. On surfaces in varnished or aged woods: Remove these layers and proceed as in the previous case.
Before applying
Do not apply at temperatures below 10ºC. Ambient relative humidity below 80%. Support temperature above 8ºC. Recommended layer thickness 30 – 40 microns per hand
How to use
Remove the contents of the container well. Apply with good air renewal. Apply 1 or 2 layers, depending on the type of wood. Do not sand between layers. It can be applied on this product: decorative protector BARPIDECOR, URETHATED WEATHER VARNISH and other solvent-based varnishes and paints. Immersion time: 4 - 6 minutes. It is not recommended to dilute.
Storage
Store in a cool place. Do not store open or started containers.
Calculate how much you need:
On surfaces in wood without protector and without varnish: Clean, sand and remove dust, grease, oil, waxes and small imperfections. On surfaces in varnished or aged woods: Remove these layers and proceed as in the previous case.
Before applying
Do not apply at temperatures below 10ºC. Ambient relative humidity below 80%. Support temperature above 8ºC. Recommended layer thickness 30 – 40 microns per hand
How to use
Remove the contents of the container well. Apply with good air renewal. Apply 1 or 2 layers, depending on the type of wood. Do not sand between layers. It can be applied on this product: decorative protector BARPIDECOR, URETHATED WEATHER VARNISH and other solvent-based varnishes and paints. Immersion time: 4 - 6 minutes. It is not recommended to dilute.
Storage
Store in a cool place. Do not store open or started containers.
Data sheet