- Out-of-Stock
MM Multisurfaces Multilak...
- Out-of-Stock
Surfaces should be clean, dry and consistent. On unprotected surfaces: Clean, sand and remove dust, grease, oil, waxes and small imperfections. On surfaces with aged and deteriorated varnish: Remove these layers and proceed as in the previous case. The renewal of the protective treatment does not require previous scratching or sanding operations, only cleaning of dust, greases, oils, etc.
Before applying
Do not apply with temperatures below 8ºC. Ambient relative humidity less than 80%. Support humidity less than 20%.
How to use
Remove the contents of the container well. Apply with good air renewal, in thin, uniform and well-extended layers. Use BARPIDECOR COLORLESS (Ref. 2811) only to renew woods already treated with color or to attenuate other tones. DO NOT USE IT ONLY OUTSIDE. As a complement to the treatment, apply BARPIDECOR BOTTOM primer (Ref. B6811) Apply three hands to use or lightly diluted with SYNTHETIC AND FATTY DILYTE 250 (Ref. 9873) and sand between layers. Exceptionally apply 4 hands, depending on the orientation and environmental conditions where the surface is exposed.
Storage
Store in a cool place. Do not store open or started containers.
Calculate how much you need: