• Out-of-Stock
Barpidecor
search
  • Barpidecor

Barpidecor

Protective treatment for water-repellent wood. It provides deep beautification and protection of the wood against moisture, weathering and solar radiation.
20 l
4 l
750 ml
375 ml
C. TECHNIQUES
Colors
C. APPLICATION
Suitable for protective impregnation and decorative protection of wooden surfaces and constructions outdoors and exceptionally indoors.
Ease of application.
Colors of great transparency
Water repellent.
It preserves and protects the wood, enhances the natural beauty and highlights its veining.
Resistant to weather and solar radiation.
It penetrates deep into the wood and protects it preventively.
Tiempo de secado
Dilution .9873
Tiempo de secado
T. Drying 8-12hours
Tiempo de secado
T. Repainted 24hours
Tiempo de secado
Performance 12-16m2/L
Matte
matte colorless
Semi-Matte
matte teak semi-matte
walnut mate to semi-matte
chestnut matte to semi-matte
matte pine to semi-matte
mahogany mate to semi-matte
matte oak to semi-matte
matte rosewood to semi-matte
oregon pine mate to semi-matte
pino tea
ebony
sapely
Surface preparation

Surfaces should be clean, dry and consistent. On unprotected surfaces: Clean, sand and remove dust, grease, oil, waxes and small imperfections. On surfaces with aged and deteriorated varnish: Remove these layers and proceed as in the previous case. The renewal of the protective treatment does not require previous scratching or sanding operations, only cleaning of dust, greases, oils, etc.

Before applying

Do not apply with temperatures below 8ºC. Ambient relative humidity less than 80%. Support humidity less than 20%.

How to use

Remove the contents of the container well. Apply with good air renewal, in thin, uniform and well-extended layers. Use BARPIDECOR COLORLESS (Ref. 2811) only to renew woods already treated with color or to attenuate other tones. DO NOT USE IT ONLY OUTSIDE. As a complement to the treatment, apply BARPIDECOR BOTTOM primer (Ref. B6811) Apply three hands to use or lightly diluted with SYNTHETIC AND FATTY DILYTE 250 (Ref. 9873) and sand between layers. Exceptionally apply 4 hands, depending on the orientation and environmental conditions where the surface is exposed.

Storage

Store in a cool place. Do not store open or started containers.

Calculate how much you need:

Total area
m2
nth Layers
Necessary amount --
Cookie consent