• Out-of-Stock
Barpidecor high protection
search
  • Barpidecor high protection

Barpidecor high protection

Protective satin finish of wood
4 l
750 ml
375 ml
C. TECHNIQUES
Colors
C. APPLICATION
Suitable for exterior wooden constructions, exceptionally indoors, in particular windows, doors, beams, trusses, structures, etc.
Ease of application.
High protection.
Maximum performance.
High solids
Repels water and environmental moisture
Resistant to weather and solar radiation.
Tiempo de secado
Dilution .9873
Tiempo de secado
T. Drying 5-8hours
Tiempo de secado
T. Repainted 24hours
Tiempo de secado
Performance 20-24m2/L
Satin
colorless satin
chestnut satin
Colors
pine
walnut
teak
mahogany
oak
rosewood
Surface preparation

Surfaces should be clean, dry and consistent. On unprotected surfaces: Clean, sand and remove dust, grease, oil, waxes and small imperfections. On surfaces with already aged protectors: Sand and remove dust. On surfaces with aged and deteriorated varnish: Remove these layers and proceed as in the previous cases.

Before applying

Do not apply with temperatures below 8ºC. Ambient relative humidity less than 80%. Support humidity less than 20%.

How to use

Remove the contents of the container well. Apply with good air renewal, in thin, uniform and well-extended layers. Use BARPIDECOR HIGH COLORLESS PROTECTION (Ref. . 2918) only to renew woods already treated with color or to attenuate other shades. DO NOT USE IT ONLY OUTSIDE. As a complement to the treatment, apply BARPIDECOR BOTTOM primer (Ref. B6811) Apply exceptionally 3 hands, depending on the orientation and environmental conditions where the surface is exposed. If with 1 hand the desired tone is obtained, apply the following hands with BARPIDECOR HIGH COLORLESS PROTECTION (Ref. 2918)

Storage

Store in a cool place. Do not store open or started containers.

Calculate how much you need:

Total area
m2
nth Layers
Necessary amount --
Cookie consent