Protective treatment for water-repellent wood that provides deep beautification and protection of the wood in general and against moisture.
4 l
750 ml
375 ml
C. TECHNIQUES
Colors
C. APPLICATION
Suitable for decoration and protective impregnation of surfaces and wooden constructions outdoors and indoors.
Minimal smell.
Penetrates and protects
Protects against moisture.
It preserves and protects the wood, enhances the natural beauty and highlights its veining.
Resistant to weather and solar radiation
Colors of great transparency.
DilutionWater
T. Drying30-60min
T. Repainted4-6hours
Performance12-16m2/L
Matte
matte colorless
Semi-Matte
matte rosewood to semi-matte
matte pine to semi-matte
matte teak semi-matte
mahogany mate to semi-matte
chestnut matte to semi-matte
matte oak to semi-matte
walnut mate to semi-matte
oregon pine mate to semi-matte
pino tea
ebony
sapely
coco mate to semimate
mint mate to semi-matte
pearl mate to semi-matte
matte bamboo to semi-matte
camel mate to semi-matte
matte sapphire to semi-matte
Surface preparation
On unprotected surfaces: Clean, sand and remove dust, grease, oil, waxes and small imperfections. On surfaces with already aged protectors: Sand and remove dust. On surfaces with aged and deteriorated varnish: Remove these layers and proceed as in the previous cases.
Before applying
Do not apply with temperatures above 8ºC. Ambient relative humidity below 80%. Support humidity less than 20%.
How to use
Remove the contents of the container well. Apply the recommended layers with good air renewal, in thin, uniform and well-extended layers. Exceptionally apply 4 hands, depending on the orientation and environmental conditions where the surface is exposed. If with less than 3 - 4 hands the desired tone is obtained, apply the following hands with BARPIDECOR TO COLORLESS WATER (Ref. 2801). Use BARPIDECOR TO COLORLESS WATER (Ref. 2801) only to renew woods already treated with color or to attenuate other tones. On tropical woods apply previously, depending on the type of wood, 1 – 2 hands of INSULATING SEALANT TROPICAL WOODS (Ref. I6860). As a complement to the treatment, apply BARPIDECOR BOTTOM primer (Ref. B6811) Percentage of application: Brush, 1st hand to use or slightly diluted with water (maximum 5%). Next hands apply undiluted. Water Gun Depending on the nozzle and pressure used in the application. Immersion, On use or slightly diluted (maximum 5%). Immersion time: 4 to 6 minutes
Storage
Store in a cool place. Do not store open or started containers.
Calculate how much you need:
Total area
m2
nth Layers
Necessary amount--
Suitable for decoration and protective impregnation of surfaces and wooden constructions outdoors and indoors.
On unprotected surfaces: Clean, sand and remove dust, grease, oil, waxes and small imperfections. On surfaces with already aged protectors: Sand and remove dust. On surfaces with aged and deteriorated varnish: Remove these layers and proceed as in the previous cases.
Before applying
Do not apply with temperatures above 8ºC. Ambient relative humidity below 80%. Support humidity less than 20%.
How to use
Remove the contents of the container well. Apply the recommended layers with good air renewal, in thin, uniform and well-extended layers. Exceptionally apply 4 hands, depending on the orientation and environmental conditions where the surface is exposed. If with less than 3 - 4 hands the desired tone is obtained, apply the following hands with BARPIDECOR TO COLORLESS WATER (Ref. 2801). Use BARPIDECOR TO COLORLESS WATER (Ref. 2801) only to renew woods already treated with color or to attenuate other tones. On tropical woods apply previously, depending on the type of wood, 1 – 2 hands of INSULATING SEALANT TROPICAL WOODS (Ref. I6860). As a complement to the treatment, apply BARPIDECOR BOTTOM primer (Ref. B6811) Percentage of application: Brush, 1st hand to use or slightly diluted with water (maximum 5%). Next hands apply undiluted. Water Gun Depending on the nozzle and pressure used in the application. Immersion, On use or slightly diluted (maximum 5%). Immersion time: 4 to 6 minutes
Storage
Store in a cool place. Do not store open or started containers.
BARPIDECORALAGUA
Data sheet
Family
Wood protectors and varnishes
Surface
Wood
Feature Listed 1
MINIMAL SMELL.
Feature listed 2
PENETRATES AND PROTECTS
Subname
Protective treatment for water-repellent wood that provides deep beautification and protection of the wood in general and against moisture.
Feature listed 3
PROTECTS AGAINST MOISTURE.
Barpicolor
No
Featured product 1
Minimal smell.
Featured product 2
Penetrates and protects
Featured product 3
Protects against moisture.
Featured product 4
It preserves and protects the wood, enhances the natural beauty and highlights its veining.
