Suitable for protection and decoration of surfaces and wooden constructions outdoors and indoors, near the sea and high mountains. Suitable for finishing and decoration of interiors and exteriors, wood, doors, windows and facades in wood, where the PROTECTIVE TREATMENT BARPIDECOR was applied
Filling power.
Weatherproof.
Hardness and elasticity.
Resistant to the expansions and contractions of wood.
Ease of application.
Incorporates U.V. filter
Dilution.9873
T. Drying5-8hours
T. Repainted24hours
Performance15-18m2/L
Bright
bright colorless
brilliant oak
bright chestnut
bright walnut
brilliant teak
Satin
colorless satin
Surface preparation
Surfaces should be clean, dry and consistent. On unvarnished surfaces: Clean, sand and remove dust, grease, oil, waxes and small imperfections. Apply three properly diluted hands, sand gently between layers to facilitate adhesion and improve the finish. On surfaces with aged and deteriorated varnish: Remove these layers and proceed as in the previous case. On surfaces with barpidecor bottom protector (B6811) or BARPIDECOR COLORS: Apply one or two hands, depending on the hands applied as a protector.
Before applying
Application temperature: Above 10ºC. Ambient relative humidity: Less than 70%. Humidity of the support to be applied: Less than 20%
How to use
Remove the contents of the container well. Apply with good air renewal, in thin, uniform and well-extended layers. Percentage of application: Brush, 1st hand diluted with 5-10% with Synthetic and Fatty Diluent 250 (Ref. 9873), 2nd and 3rd hand to use or slightly diluted (maximum 5%) Gun, depending on the nozzle and pressure used in the application. Previous background (optional) Barpidecor Background (B6811) and/or Barpidecor colors.
Storage
Store in a cool place. Do not store open or started containers.
Calculate how much you need:
Total area
m2
nth Layers
Necessary amount--
Suitable for protection and decoration of surfaces and wooden constructions outdoors and indoors, near the sea and high mountains. Suitable for finishing and decoration of interiors and exteriors, wood, doors, windows and facades in wood, where the PROTECTIVE TREATMENT BARPIDECOR was applied
Surfaces should be clean, dry and consistent. On unvarnished surfaces: Clean, sand and remove dust, grease, oil, waxes and small imperfections. Apply three properly diluted hands, sand gently between layers to facilitate adhesion and improve the finish. On surfaces with aged and deteriorated varnish: Remove these layers and proceed as in the previous case. On surfaces with barpidecor bottom protector (B6811) or BARPIDECOR COLORS: Apply one or two hands, depending on the hands applied as a protector.
Before applying
Application temperature: Above 10ºC. Ambient relative humidity: Less than 70%. Humidity of the support to be applied: Less than 20%
How to use
Remove the contents of the container well. Apply with good air renewal, in thin, uniform and well-extended layers. Percentage of application: Brush, 1st hand diluted with 5-10% with Synthetic and Fatty Diluent 250 (Ref. 9873), 2nd and 3rd hand to use or slightly diluted (maximum 5%) Gun, depending on the nozzle and pressure used in the application. Previous background (optional) Barpidecor Background (B6811) and/or Barpidecor colors.
Storage
Store in a cool place. Do not store open or started containers.
BARNIZINTEMPERIEURETANADO
Data sheet
Family
Wood protectors and varnishes
Surface
Wood
Feature Listed 1
FILLING POWER.
Feature listed 2
WEATHERPROOF.
Subname
High quality urethated synthetic varnish
Feature listed 3
HARDNESS AND ELASTICITY.
Barpicolor
No
Featured product 1
Filling power.
Featured product 2
Weatherproof.
Featured product 3
Hardness and elasticity.
Featured product 4
Resistant to the expansions and contractions of wood.
Suitable for protection and decoration of surfaces and wooden constructions outdoors and indoors, near the sea and high mountains. Suitable for finishing and decoration of interiors and exteriors, wood, doors, windows and facades in wood, where the PROTECTIVE TREATMENT BARPIDECOR was applied
